This flexible rubber strip is an ideal material for sealing and edging applications. It is easily cut with a knife and will stick to most surfaces using contact adhesive A139 or A262. Sizes stated are width by thickness. Roll size = 5 metres (which may be made up of more than one length).
Other widths and thicknesses available - POA
Prices are exclusive of VAT
This black 70°sh commercial grade neoprene rubber sheet is ideal for lots of different applications.
It is supplied in 1400mm wide by the linear metre.
Other thickesses are available. Please enquire
This white flexible food quality rubber strip is ideal for sealing and edging applications, especially where temperatures go to 200°C. It is easily cut with a knife and can be bonded in place with either S137 or S138.
Roll size = 5 metres (which may be made up of one or more lengths)
Other widths and thicknesses available. POA
This semi soft rubber (45°sh) is flexible and semi compressible. It is used for sealing Brass port lights and vents. This is manufactured from a natural rubber so has low UV resistance. For plastic and Aluminium port lights it is recommended to use an expanded neoprene seal. Maximum length is 2 metres. Size stated are width by thickness.
Other widths and thicknesses available - POA
Prices are exclusive of VAT
We are able to offer various grades of rubber sheeting, these include:-
Neoprene For general purpose gaskets and seals. Good UV resistance and moderate resistance to oils and chemicals. Commercial grade 60°/70° sh. BS2752 grades from 40° to 70°.
Nitrile Mainly used in an oil/fuel environment as it has excellent resistance. (Not suitable for unleaded petrol). Commercial grade 60°/70° sh. BS2751 40° to 70°
Nitrile/PVC For use with unleaded petrol and in an oil/fuel environment. Commercial grade 60°/70°sh.
Natural This material has excellent physical properties so is ideal for using as a seal in boats port lights, hatches and doors. It has excellent abrasion resistance, so makes an ideal liner for shot blast cabinets and material chutes. It is not resistant to oils. Hardness ranges from 40° to 70° A food quality grade is available for marine fresh water tank seals.
Insertion A natural rubber material with an insertion layer sandwiched in the middle of it to give it strength, which helps prevent it tearing.
EPDM This material has excellent resistance to UV, so is suitable for many outdoor applications. Commercial grade 60°/70°sh. A WRC grade is available for potable applications. All of the above materials are available in ether full rolls, cut lengths, strip or gaskets. Details and prices are available on application.
Order Code: 3506FS
Material: Nitrile 60°sh
Length: 1400mm
Width: 1000mm
Thickness: 3mm
Unit of Sale: Each
Price£93.28
Order Code: 3506
Material: Nitrile 60°sh
Length: 700mm
Width: 500mm
Thickness: 3mm
Unit of Sale: Each
Price£26.00